Skip to main content

Licensed & Insured — Lic. #1027421

747-255-8595
911 Construction & Electric Inc. logo
Electrician troubleshooting a wall outlet with a multimeter

Professional Electrical Repairs & Troubleshooting in Los Angeles, CA

911 Construction & Electric Inc. provides electrical repair and troubleshooting services in Los Angeles, CA for homes, businesses, and property managers. From flickering lights and dead outlets to breaker problems, wiring issues, and urgent electrical hazards, our team delivers safe, code-compliant repairs with clear communication and dependable response.

  • ✓ Licensed & Insured (Lic. #1027421)
  • ✓ 24/7 Emergency Service
  • ✓ Free Estimates
  • EVITP Certified
  • Tesla Certified
  • SCE Charge Ready Home
  • C-10 Licensed

Get Your Free Quote

We respond fast — usually within 15 minutes.

No spam, ever. We typically respond within 15 minutes.

911 Construction & Electric Inc. finds and fixes electrical problems in homes, businesses and rental properties across Los Angeles: dead outlets, breakers that won't stay on, flickering lights, warm switch plates, buzzing panels and partial outages. We track down the real cause, explain it in plain English, and give you a price before we fix it.

Smoke, flames, or someone shocked? Call 911 first. Burning smell, sparking or a hot outlet? Stop using it, turn off that breaker if it's safe, and call us now. See emergency electrician.

Common problems, and what usually causes them

  • Breaker keeps tripping: too much load on one circuit, a short or ground fault, a damaged cord, or a worn-out breaker. Reset it once; if it trips again, leave it off. Never swap in a bigger breaker. → Why a breaker keeps tripping
  • Outlets not working: check for a tripped GFCI first (it may be in another room). Otherwise it's often a loose "backstabbed" connection upstream or a failed device. → Outlet not working?
  • Part of the house lost power: a failed breaker, a loose feed, or one leg of your service. Lights dim on one side and bright on the other can mean a failing neutral, and that's urgent. → Partial power outage
  • Flickering or dimming lights: one fixture is usually the bulb, dimmer or fixture connection; the whole house dimming when the AC starts points to the panel or service. → Flickering lights
  • Warm, buzzing or sparking outlets and switches: heat from a loose or failing connection. Stop using it and call. → Outlet sparking or burning smell
  • Two-prong outlets, no GFCI, old wiring: we add GFCI/AFCI protection and grounding where practical, and tell you when a rewire is the real fix. → GFCI and AFCI outlets · Aluminum wiring repair

What a repair visit looks like

  1. You call and describe it. A licensed electrician answers. If it sounds dangerous, we tell you what to shut off before we arrive.
  2. Diagnosis on site. We start at the panel, then trace the circuit to its outlets, switches, fixtures and junction boxes, testing with meters, not guesswork.
  3. Clear explanation and price. We show you what we found and give you options, each with a price. You decide.
  4. Repair and test. Most common repairs are done the same visit, and we test the circuit under load before we leave.
  5. Permit when it's needed. Some cities, Pasadena among them, require a permit even for a like-for-like breaker swap. We pull it and schedule the inspection. → Pasadena electrical permits

Why Choose Us for Electrical Repairs & Troubleshooting

Accurate Diagnosis, Not Guesswork

We start at the panel and trace the circuit with meters, so we can tell a failed device apart from a wiring fault or an overloaded circuit, and fix the cause instead of the symptom.

A Price Before Any Repair

We show you what we found and give you options: a simple repair, a longer-term fix, or both, each with a price. Nothing gets fixed until you decide.

Most Repairs Done Same Visit

Failed breakers, outlets, switches and GFCIs, loose or burned connections, and overloaded circuits are usually fixed on the first visit and tested under load before we leave.

Honest About Bigger Problems

Repeated trips and warm connections can trace back to an overloaded panel, a Zinsco or Federal Pacific panel, or old wiring. We'll tell you plainly whether a bigger fix is worth it. You don't have to decide that day.

Homes, Businesses & Rentals

Homeowner troubleshooting, business outages affecting equipment and lighting, and tenant-reported issues for landlords and property managers, with access coordinated directly.

Licensed Electrician Answers 24/7

Call 747-255-8595 day or night. Urgent hazards like burning smells, sparking or a failing neutral are handled as emergencies.

The Benefits

What You Get

Power Back, Safely

The circuit is repaired, tested under load and left safe, not just reset. Where code calls for it, we add GFCI/AFCI protection on the work we touch.

The Real Cause Fixed

Fixing the loose connection, failed breaker or overloaded circuit behind the symptom means the same problem doesn't come back next week.

A Clear Picture of Your System

You leave knowing what failed, why, and whether anything else in the house needs attention, so you can plan instead of react. Want a full baseline? Ask about an electrical safety inspection.

FAQ

Electrical Repairs & Troubleshooting FAQs

How quickly can you fix electrical issues?

Most common repairs are done the same day, once we've diagnosed the problem. Bigger fixes that need parts, a permit or utility coordination get a clear timeline.

Do you handle emergency electrical repairs?

Yes, 24/7. Sudden outages, exposed wiring, burning smells and sparking all count. See emergency electrician.

What are common signs I need electrical repairs?

Flickering or dimming lights, breakers that trip often, burning smells, buzzing, warm outlets or switch plates, and sudden loss of power. If those point to an overloaded service, we may also recommend an electrical panel upgrade. If you notice any of these, call a licensed electrician promptly.

Can I just reset the breaker?

Once. If it trips again, leave it off, unplug what's on that circuit, and call.

Do small repairs need a permit?

It depends on the city and the work. Some cities require a permit even for like-for-like breaker or device replacement. We'll tell you and handle it.

Do you charge to diagnose?

Yes, there is a diagnostic fee. You'll get a price for the repair before we do it.

What can I do before you arrive?

Leave a tripped breaker off and note which one it is. Write down when the problem happens (only when the microwave runs, only when it rains). Unplug what's on the dead circuit, clear a path to the panel and attic or crawlspace access, and tell us about any recent work or storms. Renters: let your landlord know, and we can coordinate access with them.

Ready to schedule your electrical repairs & troubleshooting?

Contact Us

Get Your Free Quote Today

No spam, ever. We typically respond within 15 minutes.

Call 24/7Free Quote