
Professional Lighting Installation & Upgrades in Los Angeles, CA
911 Construction & Electric Inc. provides lighting installation and lighting upgrade services in Los Angeles, CA for homeowners, businesses, and property managers. From indoor lighting and recessed fixtures to outdoor, security, landscape, and energy-efficient lighting upgrades, our team delivers safe, code-compliant electrical work designed for visibility, function, and appearance.
- ✓ Licensed & Insured (Lic. #1027421)
- ✓ 24/7 Emergency Service
- ✓ Free Estimates
- EVITP Certified
- Tesla Certified
- SCE Charge Ready Home
- C-10 Licensed
Get Your Free Quote
We respond fast — usually within 15 minutes.
- CSLB Lic. #1027421, C-10 Electrical
- Tesla Energy Certified Installer
- SCE Charge Ready Home
- EVITP Certified
- 5.0 on Google (79 reviews) · 5.0 on Yelp (46 reviews)
- Call 747-255-8595
911 Construction & Electric Inc. installs and upgrades lighting for homes, businesses and property managers across Los Angeles: recessed lights, fixtures and ceiling fans, under-cabinet lighting, and outdoor, security and landscape lighting. We handle the electrical side properly, including the circuit, the boxes, the switching and the permit, so the result looks good and stays safe.
What we install
- Recessed (can) lighting: slim LED wafers and traditional housings, fished through finished ceilings or installed during remodels. → Recessed lighting installation
- Fixtures, chandeliers and pendants: heavy fixtures hung on boxes rated for the weight, new pendant locations. → Light fixture installation cost
- Ceiling fans on fan-rated boxes with separate fan and light control. → Ceiling fan installation
- Under-cabinet and accent lighting wired to a switch or dimmer. → Under-cabinet lighting
- Outdoor, security and landscape lighting on weather-rated circuits. → Outdoor landscape lighting
- Commercial and exterior lighting, including LED retrofits and parking lot lighting repair
- Dimmers, smart switches and controls, three-way and four-way switching, occupancy sensors. → Smart home wiring
How a lighting job works
- Walkthrough. We talk through what each room needs to do and check what's behind the ceiling: joists, attic access, insulation, and whether the circuit can take the load.
- Layout and fixture plan. Even spacing for recessed lights, the right ratings (damp or wet outdoors and in showers, IC-rated against insulation), and dimmers matched to the LED drivers, which prevents most flicker and buzz.
- Circuit check. If the existing circuit is overloaded, ungrounded or has old cloth wiring, we tell you before tying new lights into it.
- Written price and permit. New circuits, new fixture locations, outdoor wiring and most remodel lighting need a permit. We pull it.
- Install day. Floors protected, clean openings, boxes rated for the fixture or fan, dimmers and controls programmed. Most fixture swaps and single rooms take one visit.
- Test and walkthrough. We test every switch, dimmer and sensor with you and close out the permit.
Many pre-1960 LA homes have shallow boxes and brittle cloth wiring at the fixture. If we find damaged insulation, we show you and fix it before mounting the new light. Planning a kitchen? See kitchen remodel electrical.
Why Choose Us for Lighting Installation & Upgrades
A Layout That Lights Evenly
We plan spacing and placement so recessed lights give even light without hot spots and dark corners, and layer task, ambient and accent light on separate switches or dimmers.
The Right Fixture for the Spot
Damp- or wet-rated fixtures outdoors and in showers, IC-rated housings where they touch insulation, and fan- or weight-rated boxes for ceiling fans and chandeliers.
Dimmers Matched to Your LEDs
Most flicker and buzz complaints come from dimmers that aren't rated for the LED driver. We match them up front and fix existing ones that act up.
Circuit & Wiring Checked First
Before we tie in new lights, we check that the circuit isn't overloaded, ungrounded or running on brittle cloth wiring, and tell you what we find.
Clean Work in Finished Ceilings
We cut only the openings the fixtures need and fish wire from above or through small access holes. If an extra access opening is needed, we tell you beforehand.
Indoor, Outdoor & Commercial
Kitchens, baths, hallways, garages, porches, driveways, landscape and security lighting, plus commercial interior retrofits and exterior and parking-lot lighting.
The Benefits
What You Get
Better Light Where You Need It
Task light at counters and mirrors, softer dimmable light in living spaces, and three-way switching on stairs and halls so nothing important is in shadow.
Safer Outdoors & at Night
Motion and dusk-to-dawn lights at doors, driveways and side yards, aimed down so you light your property, not the neighbor's bedroom.
Lower Energy Use & Less Heat
Replacing old incandescent and fluorescent fixtures with LED reduces energy use, maintenance and the heat that slowly damages old fixture wiring.
FAQ
Lighting Installation & Upgrades FAQs
What types of lighting do you install?
Recessed lights, ceiling fixtures and chandeliers, pendants, ceiling fans, under-cabinet lighting, outdoor and security lighting, landscape lighting, and commercial interior and exterior lighting. We help you choose what fits the property and how you use it.
Are lighting upgrades worth it?
Yes. Lighting upgrades can improve safety, visibility, appearance and energy efficiency. Replacing old incandescent and fluorescent fixtures with LED reduces maintenance and heat.
How long does a lighting project take?
Single fixtures and small projects usually take one visit. Whole-house recessed lighting or long outdoor runs can take longer depending on scope, wiring conditions, fixture types and access. We give you a clear timeline before work begins.
Can you install fixtures I bought?
Yes. Send us the model or spec sheet so we can confirm the box, rating and dimmer compatibility ahead of time.
Do lighting projects need a permit?
New circuits, new fixture locations, outdoor wiring and remodel lighting usually do, and some cities require one even for replacements. We'll tell you and handle it.
Why do my LED lights flicker or buzz?
Usually a dimmer that isn't rated for LED, or too little load on it. Lights that dim when appliances start point to the circuit or panel instead. See electrical repairs.
Ready to schedule your lighting installation & upgrades?
Contact Us
Get Your Free Quote Today
Phone
747-255-8595Office
1308 East Colorado Blvd Ste 141, Pasadena, CA 91106
Hours
24/7 Emergency Service
